宸昶企業有限公司｜Palas | 宸昶企業有限公司

說明
規格

The Tisch Environmental PM2.5 high volume air sampler is a non-Federal Reference Method sampler for the collection of particulate matter that is 2.5µm or less. Its primary uses is for non regulatory sampling and institutional studies. The PM2.5 size selective inlet is made up of 40 stainless steel nozzles that allow only 2.5µm particulates to get deposited on the filter. PM2.5 particulates are particularly hazardous to your health as they can work their way into your lungs during respiration and can be absorbed into the bloodstream.

The PM2.5 high volume air sampler collects particulates at a flow rate between 36-60 cfm through a PM2.5 size selective inlet. As the particulates travel through the size selective inlet the larger particulates are trapped inside of the inlet as the smaller PM2.5 particulates continue to travel through the PM2.5 inlet and are collected on the 8″ x 10″ quartz filter paper. This quartz filter is weighed previously to sampling and after the sampling to determine the mass of particulates that are smaller than 2.5 microns. The flow rate on this instrument is controlled by either a mass flow controller, a volumetric flow controller or the Tisch Environmental PLUS technology electronic flow controller. Tisch Environmental offers a wide range of PM2.5 samplers with several different options to fit every custom sampling installation.

Flow Controler	Manual Flow Controlled: Manual adjusted motor speed controller.
	Mass Flow Controlled(MFC): The Mass Flow Controller uses a hot wire anemometer to maintain a steady flow rate throughout the sampling period. The hot wire anemometer is inserted into the flow channel and detects changes in thermal mass to increase or decrease the motor speed.
	Volumetric Flow Controlled(VFC): The VFC controller is a critical orifice with a predetermined hole diameter. The critical orifice is calibrated in a NIST traceable lab to determine the volumetric flow rate. The motor runs wide open and as air passes through the critical orifice,the sampler runs at a predetermined flow rate
	PLUS Technology (MFC): The PLUS technology MFC uses ambient temperature, ambient pressure, and a hot wire anemometer to maintain the set flow rate. This is the most accurate flow controller available. It also features an auto calibration function and
	PLUS Technology (VFC): The Plus Technology volumetric flow controller uses a combination of the critical orifice and the PLUS controller to calculate the ambient flow rate. The system uses the temperature, barometric pressure, and orifice pressure to calculate and record the ambient flow rate. The system also includes a digital timer.

Motor Type	Brush Style Motor: Brush Style motors use carbon motor brushes to conduct current within the electric motor. They are low cost but require routine motor brush changes.
	Brushless Style Motor: Brushless motors do not use motor brushes or require maintenance. They are higher in cost and do not have any emissions.

Timer Style	7-Day Mechanical Timer: Recognized by its bright yellow timer dial, the 7 day mechanical timer uses a series of on/off trippers to set the sampling schedule.
	Digital Timer: Recommended by the US EPA, the digital timer allows for 1 in 3, 1 in 6, 1 in 7, and custom sampling schedules. Its internal battery backup ensures that the timer will not have to be reset after a power failure. It also includes an LCD screen and soft press buttons for easy use.

產品介紹

PM2.5高量採樣器 PM2.5 High Volume Air Sampler

相關產品

TE-BC251 NIOSH 生物氣溶膠旋風分離器

多階個人式衝擊器 Personal Cascade Impactor

半揮發性有機物採樣器 Polyurethane Foam(PUF) Pesticide Samplers

低流量PM2.5/PM10採樣器 TE-Wilbur PM2.5/PM10 Sampler

安德森衝擊器 Viable Andersen Cascade Impactors